您好, 歡迎來到化工儀器網
產品分類品牌分類
-
美國JENCO水質分析 韓國M-Cubic水質分析儀 德國AMER 分光光度計 總磷測定儀 意大利匹磁 英國PPM在線水質分析儀 德國在線水中油份監測儀 COD快速測定儀 奧地利S-CAN水質分析儀 酒精檢測儀 水份快速測定儀 意大利匹磁濁度儀|污泥濃度|懸浮物 中國臺灣上泰在線電導率儀 中國臺灣上泰在線PH計 中國臺灣上泰實驗室|手提式PH計
產品簡介
稱重傳感器RTD-日本昭和SHOWA 稱重傳感器RTD 日本昭和SHOWA稱重傳感器 傳感器
詳細介紹
Features
- All stainless steel （SUS630） made.
- Filled with inactive gases. Hermetically sealed.
- Small size. Light weight. The adaptor can be disassembled.
- Can be used to both tension and compression applications.
- Main applications: For testing machines and for industrial machines.
- Accuracy class: 0.15%.
Appearance Dimensions
| Model | Capacity | Natural frequency | Weight |
|---|---|---|---|
| RTD-500N | 500N | 3.6kHz | 1.0kg |
| RTD-1KN | 1kN | 5.4kHz | 1.0kg |
| RTD-2KN | 2kN | 7.8kHz | 1.0kg |
| RTD-5KN | 5kN | 13kHz | 1.0kg |
| RTD-10KN | 10kN | 16kHz | 1.1kg |
| RTD-20KN | 20kN | 23kHz | 1.1kg |
- * Number of adaptor clamping screws（※1） is eight in rated capacities of 10kN and 20kN.
- * This Model of load cell should be mounted on an intended position in such a manner that its mounting jigs never get into touch with the surface "A".
Note that the recommended distance between the jigs and the surface "A" will be 0.5 to 1 mm. - * Weight shown in the above list does not include weight of the cables.
Specifications
| Safe Overload | 150%RC（500N～10kN） |
| 120%RC（20kN） | |
| Rated Output | 2mV/V±1% |
| Nonlinearity | 0.15%RO |
| Hysteresis | 0.15%RO |
| Repeatability | 0.1%RO |
| Excitation Voltage | 12V （or less） |
| Safe Excitation Voltage | 20V |
| Input Rsistance | 420Ω |
| Output Rsistance | 350Ω |
| Compensated Temp.Range | -10 to 60℃ |
| Safe Temp.Range | -30 to 80℃ |
| Temp.Effect on Zero | 0.01%RO/℃ |
| Temp.Effect on Output | 0.01%/℃ |
| Cable | Φ6mm-4wire shielded cable, length : 5m |