IPX5 IPX6防水测试 Spray Hose Nozzle Tester#技术规格

手持防喷水试验装置是依据标准IEC60529 IPX5/6、GB4208 IPX5/6等标准的相关条款要求制作，用于对检验具有防淋雨功能的器具或电器的防水性能进行测试。喷头采用不锈钢精密烧焊制成，适用于可能受到各种冲水或猛烈海浪影响的产品。

功能参数：

1、 适用于进行产品的IPX5、IPX6测试。

2、 孔径：ф6.3mm（IPX5）、ф12.5mm（IPX6）。

3、 IPX5、IPX6喷嘴螺纹联接、快速更换。

4、 不锈钢材质。

5、 水流量：12.5±0.625L/min(IPX5)、100±5L/min(IPX6)

6、压力表:0~0.25MPa

7、 试验时间：不小于1min/m2(但不小于3分钟)、用户设定时间（控制系统控制）。

8、 喷嘴距外壳距离：2.5-3m(试验人员控制)

9、IPX5:需提供水流速率为大于12.5L/min±5%，IPX6需提供水流速率为大于100L/min±5%干净、无杂质的清水

Specifications

internal diameter of the nozzle:6.3mm

--delivery rate:12.5/min+/- 5%

--water pressure:to be adjusted to achieve the specified delivery rate

--Core of the substantial stream:circle of approximately 40mm diameter at 2.5 distance from nozzle

--Test duration per square meter of enclosure surface area likely to be sprayed :1mm

--Minimum test duration :3min

--Distance from nozzle to enclosure surface:between2.5 and 3m

Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve.The interchangeable nozzles assemble easily to the jet handle.

The nozzles are made from stainless steel.

Include: Pressure gauge.

Flowmeter.

Stainless steel nozzle.

Valve for water flow regulation and shut off.