在儲存過程中,可能會對產品產生壓力。TPP設計和優質材料確保了解凍過程中和解凍后的安全運輸。
凍存管的特點:
- 根據螺紋的幾何結構,TPP可以避免使用硅膠墊圈,就可以實現管的安全和密封。
- 外螺紋的設計使得內表面光滑,消除了移除過程中樣品材料的損失。
- 彩色插入片提供了方便的標記和識別
- 提供方便、防刺穿和撕裂,可重復開合和激光穿孔袋。
- 可以獨立站立
- 星型底部
- 刻度字體大
首頁 >> 供求商機
X-controller 發酵體系控制系統
Terrafors-IS Bacteria 固態樣品發酵罐
Techfors-S Bacteria 小型中試原位滅菌發酵系罐
Multifors Bacteria 平行發酵系統
Labfors 5 Bacteria 實驗室臺式旗艦型小型發酵罐
Minifors Bacteria 實驗室臺式標準發酵罐
Labfors Lux LED Flat Panel 平板LED 光照發酵罐
Labfors BioEtOH 臺式發酵罐(生物燃料專用)
MoFlo Astrios EQ 超高速流式分選系統
Tube, with Snap-On Cap, Polyethylene, 250 µL
Bio-Vial™, Tube, Polypropylene, 4 mL
Stack, Four-Shelf Side Loader試管架
Tube, Thickwall, Polycarbonate, 50 mL
Tube, with Snap-On Cap, Polycarbonate, 50 mL
Tube, Thinwall, Ultra-Clear™, 15.0 mL
Tube, Quick-Seal™, Polyallomer, 1.2 mL
g-Max Kit, Quick-Seal™, Polyallomer, 6.0 mL
g-Max Kit, Quick-Seal™, Polyallomer, 3.5 mL
g-Max Kit, Quick-Seal™, Polyallomer, 5.1 mL
Tube, OptiSeal™, Polyallomer, 4.7 mL
Tube, OptiSeal™, Polyallomer, 36.2 mL
Tube, Thickwall, Polyallomer, 3.2 mL
Tube, Quick-Seal™, Polyallomer, 5.1 mL
Tube, OptiSeal™, Polyallomer, 4.9 mL
Tube, Thinwall, Polyallomer, 15.0 mL
Tube, OptiSeal™, Polyallomer, 3.3 mL
Tube, OptiSeal™, Polyallomer, 8.9 mL
Tube, OptiSeal™, Polyallomer, 32.4 mL
Tube, OptiSeal™, Polyallomer, 11.2 mL
g-Max Kit, Quick-Seal™, Polyallomer, 27 mL
Tube, Quick-Seal™konical™Polyallomer8mL
Tube, Quick-Seal™,konical™, Polyallomer, 28 mL
Tube, Quick-Seal™,konical™, Polyallomer, 1.5 mL
Tube, Quick-Seal™, Polyallomer, 3.9 mL
Tube, Quick-Seal™,konical™, Polyallomer, 8.5 mL
Tube, Quick-Seal™,konical™, Polyallomer, 4 mL
Tube, Quick-Seal™,konical™, Polyallomer, 1.3 mL
Tube, Quick-Seal™,konical™, Polyallomer, 23 mL
Tube, Quick-Seal™,konical™, Polyallomer, 3 mL
Tube, Thinwall,konical™, Polyallomer, 1.5 mL
Tube, Thinwall,konical™, Polyallomer, 10 mL
Tube, Thinwall,konical™, Polyallomer, 14.5 mL
Tube, Thinwall,konical™, Polyallomer, 25 mL
Tube, Thinwall,konical™, Polyallomer, 30 mL
Tube, Quick-Seal™,konical™, Polyallomer, 3.2 mL
Tube, Thinwall,konical™, Polyallomer, 3 mL
Tube, with Snap-On Cap, Polypropylene, 50 mL
Tube, with Snap-On Cap, Polypropylene, 1.5 mL
g-Max Kit, Quick-Seal™, Polyallomer, 4.2 mL
g-Max Kit, Quick-Seal™, Polyallomer, 2.0 mL
g-Max Kit, Quick-Seal™, Polyallomer, 15 mL
Bottle, Polycarbonate, 10.4 mL
Tube, Thickwall, Polyallomer, 81 mL
Tube, Thickwall, Polyallomer, 32 mL
Tube, Thickwall, Polycarbonate, 4 mL
Tube, Polyallomer, Thickwall, 3.5 mL
Tube, Quick-Seal™, Polyallomer, 4.2 mL
Tube, Thickwall, Polyallomer, 6.5 mL
Tube, Quick-Seal™, Polyallomer, 17 mL
Tube, Thickwall, Polycarbonate, 6.5 mL
Tube, Thickwall, Polycarbonate, 1.0 mL
Tube, Thickwall, Polyallomer, 4 mL
Bottle Assembly, Polycarbonate, 500 mL
Tube, Quick-Seal™, Polyallomer, 3.5 mL
Tube, Thickwall, Polyallomer, 10 mL
Tube, Thickwall, Polycarbonate, 32 mL
Bottle, Assembly, Polycarbonate, 70 mL
Tube, Thickwall, Polycarbonate, 10 mL
Tube, Thickwall, Polycarbonate, 3 mL
Tube, Thickwall, Polyallomer, 3 mL
Tube, Thickwall, Polyallomer, 10.5 mL
Tube, Thickwall, Polycarbonate, 81 mL
Tube, Thickwall, Polycarbonate, 3.5 mL
Bottle, with Cap Assembly, Polycarbonate, 10.4 mL
Bottle Assembly, Polycarbonate, 70 mL
Tube, Thickwall, Polyallomer, 3.5 mL
Tube, Thickwall, Polycarbonate, 10.5 mL
Bottle, with Cap Assembly, Polycarbonate, 26.3 mL
Tube, Quick-Seal™, Polyallomer, 5.9 mL
Bottle Assembly, Polycarbonate, 26.3 mL
Tube, Thinwall, Polyallomer, 2.2 mL
Tube, Thinwall, Ultra-Clear™, 800 µL
Tube, Quick-Seal™, Ultra-Clear™, 6.0 mL
Tube, Thickwall, Polyallomer, 500 µL
Tube, Quick-Seal™, Ultra-Clear™, 27 mL
Tube, Quick-Seal™, Polyallomer, 8 mL
Tube, Quick-Seal™, Polyallomer, 10 mL
瑞士 TPP 冷凍管
在儲存過程中,可能會對產品產生壓力。TPP設計和優質材料確保了解凍過程中和解凍后的安全運輸。
凍存管的特點:
使用TPP凍存管架(其鎖定系統位于凹槽中)可以進行單手操作。
激光穿孔:
激光穿孔使袋子的首次打開更容易,不需要輔助打開輔助裝置。另外,還有一個完整的激光穿孔作為安全密封。
自封口:
使袋子能夠輕松、多次打開和關閉。這對于大容量的袋子非常有價值。
建議
務必使用適當的安全設備和程序。
裝量
重要的是,冷凍管的填充量不能達到大可能的填充量。因為細胞懸浮液在冷凍過程中有可能膨脹(記錄:比試管的大刻度小0.2 ml)。
Type | Product No. | Volume max (ml) | Volume Recom. (ml) | Dimensions (mm) | Material | Colours | Qty / Bag | Qty / Case | Case (kg) |
![]() | 89012 | Grad. max 0.9 | max 0.7 | 12 x 37 | PP | 100 | 800 | 1.7 | |
![]() | 89020 | Grad. max 1.5 | max 1.3 | 12 x 48 | PP | 100 | 800 | 2.1 | |
![]() | 89040 | Grad. max 3.5 | max 3.3 | 12 x 75 | PP | 100 | 400 | 1.6 | |
![]() | 89050 | Grad. max 4.5 | max 4.3 | 12 x 90 | PP | 100 | 400 | 1.8 | |
![]() | 99020 | -- | -- | 11 x 1 | PP | 1 bag of each colour: blue, yellow, green, purple, red, white | 6 x 100 | 7800 | 1.3 |
![]() | 89801 | -- | -- | 11 x 1 | PP | white | 600 | 3600 | 0.5 |
![]() | 89802 | -- | -- | 11 x 1 | PP | blue | 600 | 3600 | 0.5 |
![]() | 89803 | -- | -- | 11 x 1 | PP | yellow | 600 | 3600 | 0.5 |
![]() | 89804 | -- | -- | 11 x 1 | PP | green | 600 | 3600 | 0.5 |
![]() | 89805 | -- | -- | 11 x 1 | PP | pink | 600 | 3600 | 0.5 |
![]() | 89806 | -- | -- | 11 x 1 | PP | red | 600 | 3600 | 0.5 |
Type | Product No. | Fitting Vials | Capacity (pcs) | Dimensions (mm) | Material | Qty / Bag | Qty / Case | Case (kg) |
![]() | 99014 | 4 - 5 ml | 81 | 133 x 133 x 95 | PP | 1 | 10 | 2.6 |
![]() | 99015 | 1.2 - 2 ml | 81 | 133 x 133 x 45 | PP | 1 | 20 | 3.7 |
![]() | 99016 | universal | 40 | 209 x 109 x 24 | PP | 1 | 12 | 1.4 |