详细介绍
细胞应力共培养系统,细胞动态共培养系统
美国Flexcell公司专注于细胞组织应力(牵张拉伸应力、三维水凝胶牵张拉伸应力、压应力和流体切应力等)加载刺激培养产品的设计和制造,提供*的体外细胞拉应力、压应力和流体剪切应力加载刺激与立体水凝胶支架三维细胞组织牵拉加载培养系统而*。其产品成熟度高、成功应用文献量达4000多篇,国内有包括上海交通大学、复旦大学、同济大学、上海第九医院、中科院力学所、北京大学第三医院、北航生物与医学工程学院、首都医科大学、广州医科大学、南方科技大学、福建协和医院、南方医科大学近100家成功高校、医院及基础科研单位使用,无技术风险和使用风险,flexcell体外高通量细胞牵张拉伸力、压应力以及流体剪切力加载培养系统已成为细胞力学体外加载模型的黄金标准。
1、提供美国Flexcell细胞应力加载培养与实时观察分析系统,包括:
1.1.FX-5000T体外细胞拉应力加载培养与实时观察分析系统
1.2.FX-5000C细胞组织压应力加载培养与实时观察分析系统
1.3.FX-5000TT细胞组织三维拉应力加载培养与实时观察分析系统
1.4.STR-4000流体剪切应力加载培养与实时观察分析系统
FX-5000T体外细胞拉应力加载培养与实时观察分析系统
新增CellSoft不同基底硬度牵张皿(弹性模量范围1-80kPa)
适用样品:细胞或者组织(2D、3D)
轴向:二维等边轴、二维单轴向、三维等边轴、三维单轴向、三维梯形牵
张牵张模式:真空动力抻拉培养板弹性柔性基底膜或3D水凝胶包埋的细胞
实时观察:StageFlexer显微附属设备可在显微镜下观察牵张作用下反应方
便对照:可控制同一块培养板部分孔细胞受力与否
多组牵张条件作用对照:可同时运行多个不同压力大小、不同频率
不同加载周期程序,方便多组牵张条件对比;
软件精准调控:对牵张加载周期、张应变大小、频率、波形精确智能调控
牵张范围:0 - 33%
牵张频率:0.01- 5 Hz
细胞量大,便于后期分析:系统牵张传导仪支持4块6孔(每孔1.2* 105个细胞)或24孔牵张板,可同时兼容4个独立的FlexLink牵张加载传导仪 ,独立操作四个不同的实验程序
支持任何波形种类:如更好地控制在超低或超高应力下形。
支持transexual细胞牵张拉伸共培养:
The Flexcell® Transwell® Holder supports and raises a Transwell® device so that it rests above the underlying cell
monolayer grown on the rubber membrane bottom of a Flexcell® BioFlex® culture plate (Fig. 1-2). The Transwell®
Holder allows users to perform co-culture and cell migration assays within a Flexcell® BioFlex® culture plate, thus
allowing users to test the effects of secretagogues from strained cells on unstrained cells in the Transwell®. The
Transwells® can also act as an unstrained control in the same well as a strained sample.
Transwell® Holders for 6-well Flexcell® BioFlex® plates fit 6-well Transwell® inserts (24 mm insert diameter or 37-
41 mm outer lip diameter and 15.5-16.5 mm height), and Transwell® Holders for 24-well Flexcell® HT BioFlex® plates
fit 24-well Transwell® inserts (6.5 mm insert diameter or 16.9-18.8 mm lip diameter and 15.5-16.5 mm height).
Transwells® should be used according to the manufacturer’s recommended protocol.
此款产品不用于医疗,不用于临床使用,此产品仅用于科研使用。