13380184263
提供商
东莞市广联自动化科技有限公司资料大小
288.4KB资料图片
下载次数
2次资料类型
PDF 文件
浏览次数
311次Cat Pumps泵的维修销售表下载
Pump Manifold or Fluid-End
Pressure Regulating Unloader Valve - Used to set and maintain consistent system pressure. Rotate clockwise to increase pressure or counterclockwise to decrease pressure.
Pump Inlet Port/Garden Hose Fitting
Chemical Injector
Inlet Auxillery Port - Used for additional accessories such as an inlet filter or thermal valve.
Drain Plug - Drain plug and oil filler cap can be switched to mount the pump 180 degrees.
Oil Sight Gauge - Oil level should be in the middle of the sight gauge when the pump is not in operation.
Oil Filler Cap
Pump Drive-End/Crankcase
Pop-Off/Relief Valve - Used for secondary protection against over-pressurization.
Thermal Valve - Used on closed loop by-pass lines to recycle water in event of excessive heat.
Pressure Gauge - Used to accuratley monitor pump pressure.
Inlet Filter - Used to capture and prevent contamination particles from entering and possibly causing damage to the pump and system components.
By-Pass Hose - Used to route pump flow from unloader back to pump inlet when system is running in bypass.
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，化工仪器网对此不承担任何保证责任。
温馨提示：为规避购买风险，建议您在购买产品前务必确认供应商资质及产品质量。
