QQ交談
您所在位置：請輸入產品關鍵字：
郵編：523560
聯系人：李菲
電話：0769-83992528
傳真：0769-83992538
手機：13268885866
售后電話：13538333087
留言：發送留言
個性化：www.kowintest.com
網址：www.kowintest.cn
商鋪：http://www.mtfinger.com/st232864/
ASTM G154-06（非金屬材料）快速紫外老化測試方法
最近更新時間：2014-11-10
提 供 商：廣東科文試驗設備有限公司資料大小：148.9KB
文件類型：PDF 文件下載次數：1032次
資料類型：未知文件瀏覽次數：6740次
ASTM G154-06(非金屬材料)快速紫外老化測試方法
1. Scope
1.1 This practice covers the basic principles and operating
procedures for using fluorescent UV light, and water apparatus
intended to reproduce the weathering effects that occur when
materials are exposed to sunlight (either direct or through
window glass) and moisture as rain or dew in actual usage.
This practice is limited to the procedures for obtaining,
measuring, and controlling conditions of exposure. A number
of exposure procedures are listed in an appendix; however, this
practice does not specify the exposure conditions best suited
for the material to be tested.
NOTE 1—Practice G 151 describes performance criteria for all exposure
devices that use laboratory light sources. This practice replaces Practice
G 53, which describes very specific designs for devices used for fluorescent
UV exposures. The apparatus described in Practice G 53 is covered
by this practice.
1.2 Test specimens are exposed to fluorescent UV light
under controlled environmental conditions. Different types of
fluorescent UV light sources are described.
1.3 Specimen preparation and evaluation of the results are
covered in ASTM methods or specifications for specific
materials. General guidance is given in Practice G 151 and ISO
4892-1. More specific information about methods for determining
the change in properties after exposure and reporting
these results is described in ISO 4582.