·组合步入式恒温湿室为业界提供大型零件、半成品、成品的温湿度环境测试。
·如：计算机终端机、汽车零组件。
Combined wald-in constant temperature humidity chamber provides temperature and humidity environmental tests for large parts,semi-finishend products,and finished products,e.g. computer terminals,auto parts.

组合步入式恒温恒湿室为业界提供大型零件、半成品、成品的温湿度换将测试，如：计算机终端机、汽车零组件。恒温恒湿主要由控制面板、配电盘、保温库板、送风机、加热器、加湿器、冷冻机组合而成，主要规格可区分为6种标准室内尺寸及24种不同条件测试规范。
The walk in temperature and humidity chambers are used for test large components,assemblies and finished products in various industries,e.g. monitor and autos productions.They are constru-ctedin modules of control panel electrical control system,partition,air circulation and heating/cooling unit.The chambers are specialized in 6 standard sizes and 24 standard conditioning modules.

·利用多翼式送风机强力送风循环，避免任何死角，使室内温湿分布均匀。
·完整的安全?；ぷ爸?。
·假如异常状况发生时，控制荧幕上即自动显示故障状态，切断电源开关，并提出故障排除方法。
·The sirocco fan provides greater air flow rate to minimize any dead zone in the chamber to ensure the uniformity of temperature and humidity.
·Well-prepared safety devices
·If the safety devices of chamber activate,Monitor will display the trouble shooting details and sugg-ested solution.

·GB10586-89湿热试验箱技术条件           ·GB/T2423.4-1993交变湿热试验方法
·GB10589-89低温试验箱技术条件           ·GJB150.3-86高温试验
·GB10592-89高低温试验箱技术条件         ·GJB150.3-86低温试验
·GBI1158高温试验箱技术条件              ·GJB150.7-86太阳辐射试验
·GB2423.1-1989低温试验方法              ·GJB150.8-86淋雨试验
·GB2423.2-1989高温试验方法              ·GJB159.9-89湿热试验
·GB/T2423.3-1993恒定湿热试验方法        ·GJB150.10-86霉菌试验

东莞市庆声试验设备有限公司全国企业之一！

  如有需要请咨询我司网：

http://www.dgqingsheng.net/     感谢您的咨询！