SANTEST-GYSE-A Shanghai Hangou  Mechanical And Electrical Equipment Co。，Ltd.GYSE-A线性位移传感器GYSE-A是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~3000mm，高精度，高品质，

The GYSE-probe is an all-in-one type sensor with positional
resolution up to 1μm.
Positon output is Analogue, SSI, or Incremental.
Velocity output (option) is avaiable for Analogue type.
The positonal difference between 2 magnets can be observable
as well.
This allows quick and easy sensor cartrige replacement.
Sensor parameters (zero, full-scale or range) can be adjusted by
using the Windows programming software (ISO9141).

Specifications

Non-linearity

< ±0.025%FS (Min.±50μm)

Resolution

16bit (1/65536)

Repeatability

±0.001%FS (Min.±3μm)

Temp drift

±20ppmFS/°C

Output

Analogue

Position output (Standard)

0-10V
(output current:Max.5mA, load:Min.2kΩ)
Or 4-20mA (load:Min.500Ω)

Velocity output (Option)

±10V or 4-20mA / Resolution:16bit (1/65536)

Alarm output

Open drain　50V　0.1A　(Alarm signal for lost magnet)

Power supply

+24 (±2) VDC (80mA)

Frequency response

Std 1kHz (depending on stroke) sampling

Admissible press.

35MPa (probe rod)

Operating Temp

-20°C-+80°C

Storage Temp

-40°C-+80°C

Vibration

15G (10-2000Hz)

Shock

100G (2msec)

Protection

IP67 (Connecting mount or Pigtail type)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Effective stroke
15mm-5200mm

(2):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF-3A

(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14Φ13.8

(4)Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
For CN type, only counter connector supplied.
In case extra cable needed, specify the length.

(5):Analogue position output (OUT1)

AD

0-10V (Standard)

AR

10-0V

BD

4-20mA

BR

20-4mA

CD or CR□□
bipolar output
[ex]
CD10
CR05

□□V-□□V

-10V-+10V
+5V--5V

V Z/F
[ex]
V1/5
V9.5/0.5

Custom order
1-5V
9.5-0.5V

I Z/F
[ex]
I5.12/20
I20/5.38

Custom order
5.12-20mA
20-5.38mA

*Z=Zero positon
*F=Full scale position

(6):Option:Analogue output (OUT2)
Position:see (5)
Velocity output (Note)
VA[ ]　±10V
WB[ ]　4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity＝9.99mm/sec)
N:No option

(Note)
VA:when magnet stops, output is 0V. when moving toward probe tip, +10V
WB:when magnet stops, output is 4mA. when moving in any direction, 20mA.

Dimensions

Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2Y.
Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, Option:L type)