力士樂REXROTH柱塞泵

力士樂REXROTH柱塞泵的一般信息
–A4VSO被設計用于開環電路操作。
–系統設計，安裝和調試需要訓練的技術人員或商人。
所有液壓端口只能用于液壓服務線的緊固。
擰緊力矩：
?所有在本數據表中所提及的擰緊力矩為zui大值，且不得超過（在鑄件中的女性螺紋的zui大值）。
請遵守制造商關于使用配件的zui大允許擰緊力矩的信息。
用緊固螺釘DIN 13我們建議檢查允許擰緊力矩在個別情況下根據VDI 2230標準問題2003。
在一個泵的運行過程中，特別是一個電磁線圈可以非常熱。采取適當?shù)陌踩胧ㄈ绱┓雷o(hù)服）。
所有給定的數據和信息必須堅持。
General information
– The pump A4VSO was designed for operation in open loop circuits.
– Systems design, installation and commissioning requires trained technicians or tradesmen.
– All hydraulic ports can only be used for the fastening of hydraulic service lines.
– Tightening torques:
- All tightening torques mentioned in this data sheet are maximum values and may not be exceeded
（Maximum values for the female threads in the castings）.
Please comply with the manufacturer‘s information regarding the max. permissible tightening torques for the used fittings.
- For fastening screws to DIN 13 we recommend to check the permissible tightening torque in each individual case acc. to
VDI 2230 issue 2003.
– During and shortly after operation of a pump the housing and especially a solenoid can be extremely hot. Take suitable safety
measures （e.g. wear protective clothing）.
– All given data and information has to be adhered to.