Condec Source3000 压力源的压力发生器配备了一个大容量的圆筒，以确保您在使用期间氮气不会泄露出来。同时也消除了不便的麻烦和物理压力的手泵。

Cindec Source3000压力源有两个端口，用于连接到一个测量装置，几乎可以连接到任何电子校准器。

便携式气动Condec Source3000压力源是一个*的装置，采用了压力游标您可以通过表针控制以达到精确的压力读数，从而消除了过冲造成重大损失的风险。 Condec Source3000压力源是铝合金手提箱，提供轻薄便携，以及在工业环境中的?；ぁ?/span>

特点

自含有氮气缸

“过压?；?rdquo;调节器

两个端口可以连接到被测单元作为一个精确的校准

可与所有压力校验仪型号

精确的表盘拨号，所需压力与的阀组件

在3000psi15.2立方英尺氮

铝合金手提箱

前面板压力表告知操作员的气缸内部压力水平

产品规格

内部

氮气在3000 psig的15.2立方英尺

133立方英寸，3000 psig的评价，压力5000 PSIG测试，

6061铝合金材料

储存温度

0到185°F（-17.8至85°C）

压力介质

清洁干燥的氮气或等于

压力调节器

3000 psig时，单级，自排气，非出血

压力表

（2）两英寸直径，0-4000 psig的

模型

98916 - 3000世伟洛克QC4风格快速断开源

Female测试端口和QC4快速连接Male填Port（丁腈橡胶-N）

98917 - 3000罗尔斯顿quick-test/check-valve来源

的Male测试端口和标准的7/16日-20Male填Port（丁腈橡胶）

Fully pneumatic, the Condec Source 3000 pressure source offers a clean and dry pressure up to 3000 psi. A quick, accurate, and portable pressure source, the new Condec Source 3000 pressure source is designed for extended use wherever your job takes you.

The Condec Source 3000 pressure source's pressure generator is equipped with a large-capacity cylinder that ensures you won't run out of nitrogen in the middle of a job. It also eliminates the inconvenience and physical stress of hand pumps. The Condec Source 3000 pressure source has two ports for connecting to a measuring device and virtually any electronic calibrator.

The portable pneumatic Condec Source 3000 pressure source is a unique device that incorporates a pressure vernier to allow you to dial in exact pressure readings, which eliminates the risk of costly damage from overshoot. The Condec Source 3000 pressure source is housed in an aluminum carrying case that provides lightweight portability as well as protection in industrial environments.

Features

·         Self-contained nitrogen cylinder

·         "Overpressure Protection" regulator

·         Two ports to connect to unit under test as well as a precision calibrator

·         Works with all pressure calibrator models

·         Precisely dial into required pressures with patented valve assembly

·         15.2 cubic foot nitrogen at 3000 psi

·         Aluminum carrying case

·         Front panel gauges inform operator of internal cylinder pressure level

Specifications

·         INTERNAL
15.2 cubic foot nitrogen at 3000 psig
133 cubic inches, 3000 psig rating, 5000 psig test pressure,
6061 aluminum material

·         STORAGE TEMPERATURE
0 to 185°F （-17.8 to 85°C）

·         PRESSURE MEDIA
Clean dry nitrogen or equal

·         PRESSURE REGULATOR
3000 psig, single stage, self venting, non-bleed

·         PRESSURE GAUGES
（2） Two-inch diameter, 0-4000 psig

Models

·         98916 - Source 3000 with Swagelok QC4 Style Quick-Disconnect
Female Test Ports and QC4 Quick-Connect Male Fill Port （Buna-N）

·         98917 - Source 3000 with Ralston quick-test/check-valve
Male Test Ports and Standard 7/16 -20 AN Male Fill Port （Buna-N）